Murphy, TX
Roofing in Murphy, Built Right Down to the Last Nail
We do residential and commercial roofing for owners in Murphy, Wylie and Sachse, along with kitchen remodeling, bathroom remodeling and commercial contracting. Most roofs fail at small spots like a flashing lap, a nail set too high or a fan vented into the attic. We spend our time there, so the job holds up.
- Licensed and insured
- 10 years of experience
- Free estimates by phone
- Written line-item estimates

From First Call to Final Walk-Through
Here is the order we follow on nearly every job. Each day, you know what the crew is doing and why.
- 1
A phone call
Describe the problem and what you would like done. We pick a time to come by and see it in person.
- 2
A close look and measurements
On a roof we check the decking, flashing and vents. Indoors we look at plumbing, wiring and how you use the space. We snap photos so you see exactly what we found.
- 3
Your estimate on paper
Each line is written out. We go through it together and answer your questions. You can take your time deciding.
- 4
The work, with your property covered
We cover plants, floors and anything close to the work. When a permit is required, we pull it and book the city inspection.
- 5
Cleanup and a final look together
Debris gets hauled off, and on roof jobs we sweep the yard with a magnet for stray nails. Then we walk the finished work with you.

What We Build and Fix
We work in two places: on top of the building and inside it. On the roof, that means residential roofing for houses and commercial roofing for flat and low-slope business roofs. Indoors, we do kitchen remodeling and bathroom remodeling, and we manage commercial contracting projects for business owners from the first plan to the last detail. Open the service that matches your job to see how we do it, or call and describe what you need.

Commercial Roofing
New low-slope and metal roof systems for shops, offices and small commercial buildings, with welded seams and flashing done right.

Kitchen Remodeling
Kitchen remodels where the hidden work gets the most care: valves, drains, circuits and a hood vent that actually goes outside.
Bathroom Remodeling
Shower, tub and vanity updates built with the waterproofing, slope and venting that keep a bathroom sound for years.
Residential Roofing
New roofs for your home, installed with attention to the flashing, nailing and ventilation that decide how long they last.
Commercial Contracting
One contractor to plan, permit and run your restroom, break room and roofing projects, with the work scheduled around your business.
Towns We Cover
Our home base is Murphy, and we take jobs throughout the cities nearby: Wylie, Sachse, Parker, Plano, Garland and Richardson, plus Allen, Rowlett, Fairview and Lucas. Every one of these towns gets the same hot summers and spring storms, so homes and businesses there need the same careful roofing and remodeling work.
- Murphy
- Wylie
- Sachse
- Parker
- Plano
- Garland
- Richardson
- Allen
- Rowlett
- Fairview
- Lucas
Wondering if we cover your address? Call us and we can tell you on the spot.
What Sets the Price of Your Job
Every job gets priced on its own. A number means little until you know what is behind it, so we show you the reasons line by line. These are the things that move the cost most on roofing and remodeling work, and we cover each one with you at the estimate.
The estimate costs you nothing and arrives in writing with every line explained. If something new turns up once work begins, we pause, show it to you and price it before we go on.
- Square footage and slope
- A bigger roof or room takes more material and more hours. Steep pitches add time too, since the crew works tied off and has to move with care.
- Hidden condition
- Soft roof decking or a rotted subfloor under an old tub often stays hidden until things are opened up. We point out any warning signs we can spot ahead of time, and we price any added fix before we touch it.
- Your material choices
- Shingle grade, membrane type, fixtures and finishes each carry their own price. We set the options next to each other so you can compare cost with how many years each one should give you.
- Relocating plumbing or walls
- Leaving a sink or shower in its current spot keeps the cost down. Moving drains, gas lines or wiring adds labor and usually a permit.
- Permits and site access
- If the city calls for a permit, that fee goes on your estimate. A narrow driveway, a tall wall or rooftop units on a business roof can add time as well.
How We Work on Your Job
A roof or a remodel can look fine on day one and still fail in year three. The difference is usually something you never see once the job is closed up.
Nails where they belong
Every shingle has a narrow nailing strip. A nail an inch too high lets the wind lift the tab. We check nail placement as we go, not after the bundle is gone.
Flashing lapped the right way
Water runs downhill, so each piece of step flashing has to overlap the one below it. We set it at walls, chimneys and pipe boots so water is pushed out, never in behind.
Wet areas sealed before they are covered
In a bathroom, the waterproofing behind the walls matters more than what goes on them. We seal and test the shower area before anything closes it up.
Fans vented outside, not into the attic
A bath fan or range hood that dumps moist air into the attic can rot decking from below. Because we work on roofs too, we run those ducts all the way out through a proper roof or wall cap.
A straight answer on scope
We tell you what the job needs and what it does not. If something can wait, we say so. You get the estimate in writing, line by line.

A Local Crew That Sweats the Small Stuff
We are a Murphy company. We roof homes and businesses, and we remodel kitchens and baths. Doing both has taught us how the inside and outside of a building depend on each other. A leak at a pipe boot can ruin a new ceiling. A bath fan vented the wrong way can ruin a good roof.
Most of what we do well, you will never see. It is the starter strip set right at the eave, the shower pan sloped to the drain, the seam on a flat roof welded clean. We think those parts are worth the extra minutes, so we take them. North Texas heat and spring hail find every shortcut, and we would rather not come back to fix our own work.
- License
- Licensed
- In business
- 10 years of experience
- Insurance
- Insured
Common Questions From Customers
Do you charge to give an estimate?
No. We come out, look at the work and give you a written estimate for free. You decide afterward if we're the right fit. Call and we'll set a time.
Do you offer a warranty on your work?
Qualifying projects include our workmanship warranty. Coverage varies by service, and we walk through the specific terms for your project when we go over the estimate together.
Do I have to get the permits myself?
No, we take care of that. When the city requires a permit, we file for it and schedule the inspection. The fee shows on your estimate up front, so nothing catches you off guard.
Can one crew handle both my roof and a remodel?
Yes, and each job can make the other better. On a bathroom remodel, for example, we can route the exhaust fan out through the roof correctly. Having one crew on both cuts down on handoffs and gaps between trades.
Can we stay in the house while you remodel the kitchen or bathroom?
Most families stay. We seal off the work area to keep dust down and leave walkways open. For kitchens, we set up a basic temporary spot in advance for the microwave, coffee maker and similar items.
Do you work on commercial buildings?
We do. We install commercial roofing on flat and low-slope roofs and manage commercial contracting projects. Work is scheduled around your hours so employees and customers can still come and go.
How do I get started?
Give us a call and describe the job. We'll ask a few questions, set a day to see it ourselves, and follow up with a written estimate. It all begins with that phone call.

Let's Look at Your Project
Tell us what you need on the roof or inside. We will come out, measure, and give you a written estimate you can take your time with.